Accessories

Product Details:

Leveraging on our expansive distribution network, we procure and deal in a high performing range of Bow Shackles. Clients can avail from us new and used Dee – Shackles in various sizes to meet their specific requirements. Moreover, the products offered by us are widely used in lifting accessories, rigging hardware companies, marine industries, construction companies, finished machinery manufacturers and heavy equipment manufacturers.

We offer Various Capacity screw Pin type dee shackles according to customers requirement.

Note

The pin diameters actually used may be based on any standard series for sizes of bar material provided that the intervals between adjacent sizes do not exceed the R20 Interval (1.12) The next size above the minimum pin diameter, D min as given in the above table should be used. The Nominal diameter D used is then subject to the tolerances specified in 5.2 of IS:6132 (Part I). 1971 The eye outside diameter then becomes twice the nominal Pin Diameter D subject to the tolerances in 5.2 of IS:6132 (Part II) - 1971.

 

Specification for Shackles :

Part I General Requirement for grade 30, 40, and 63 only.

Shackles of Grade 30, 40, 63 confirm to I.S.I specification 6132

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

The Bow Shackle has a larger inner working radius than a D Shackle, offering more space for a strap or rope eye and the ability to achieve greater angles when recovering in difficult situations.

Leveraging on our expansive distribution network, we procure and deal in a high performing range of Bow Shackle. Clients can avail from us new and used Dee – Shackles in various sizes to meet their specific requirements. Moreover, the products offered by us are widely used in lifting accessories, rigging hardware companies, marine industries, construction companies, finished machinery manufacturers and heavy equipment manufacturers.

We offer Various Capacity screw Pin type dee shackles according to customers requirement.

Note

The pin diameters actually used may be based on any standard series for sizes of bar material provided that the intervals between adjacent sizes do not exceed the R20 Interval

Specification for Shackles : Part I General Requirement for grade 30, 40, and 63 only.

Shackles of Grade 30, 40, 63 confirm to I.S.I specification 6132

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Features:

Designed for easy Frequent Application.

Enhanced safety with Bolt, Nut & Cotter split Pin.

Reduce the need to tighten pin before each application.

For use on direct lifting or single load systems.

Traceability code, capacity, FERRETERRO and WLL embossed.

 

Features:

Material: Grade 80 steel with Alloy pin.

Construction: Heat treated and stress relieved.

Finish: Galvanized and coated.

Proof load: Tested at 2 times the working load.

Fatigue: Fatigue tested at 1.5 times of WLL.

Standard: As per US federal specification RR-C-271-D.

 

Specification:

 

Working Load Limit* (Tones)Body Dia

(mm) d

C Pin Dia

(mm) D

B Jaw Inside Width (mm) W

A Inside Length (mm) S

G Eye Outside Dia (mm) e

F Average Weight with Nut Bolt Type Pin ( Kg) 0.56.47.911.922.415.50.10.757.99.713.53319.10.119.711.216.831.823.10.11.511.212.719.136.626.90.2212.71620.641.430.20.33.251619.126.95138.10.64.7519.122.431.860.54616.522.425.436.671.5531.48.525.428.742.98160.52.29.528.731.8469168.53.11231.835.151.5100764.113.535.138.157111845.31738.144.560.5122927.2

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are engaged in trading and supplying a wide range of Wire Rope Clamps. These clamps are used to fix the loose end of the loop back to the wire rope. The clamps offered by us have U-shaped bolt, a forged saddle and two nuts. Moreover, to terminate a wire rope, two or three clamps are usually used. Clients can avail these clamps in standards sizes at market leading rates. Our entire range of clamps is wide;y used in cement plant, chemical industry and oil industries.

Product Details:

Note:

For wire ropes of intermediate sizes, the next larger size of thimble shall be used.
Dimension M is the standard pin hole and the largest pin-hole for each thimble. Should a
smaller pin-hole be required the diameter of this shall be stated in the enquiry and order.

 

Specification:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Note:

• For wire ripes of intermediate size, the next larger size of thimble shall be used.
• These dimension are minimum for thimblas of nominal size up to and including 41 only

 

Specification:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Note:

• The most complete line of Eye hooks. Available ½ ton to 60 tons.
• Proper design, careful forging and precision controlled quench and tempering give maximum strength.
• Every Eye Hook has a pre-drilled cam which can be equipped with a latch.
• Eye hooks are load rated.
• Available in mild steel and alloy steel.
• Proof load is 2 times Working Load Limit. All carbon hooks-average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks
• 1 ton to 22 ton - average straightening load (ultimate load) is 4 timesWorking Load Limit. Alloy eye hooks 30
• Straightening load (ultimate Load) is 4 times the Working Load Limit. All Alloy hooks-average straightening load (ultimate load) is 4 times Working Load Limit.

 

Specification:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Features:

• Allows a variety of connections to round or flat synthetic slings
• Eliminates bunching effect
• No sharp edges or raised letter to cut or damage soft slings
• Recessed locking pin with stainless steel square spring for strong mechanical lock, enclosed in galvanized housing
• Part of Gunnebo Lifting’s SK System of custom rigging solutions. Can be connected to any other SK component.
• Full traceability for each component

Specification:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are dealers of Monkey or you can say delta plate in various capacity according to the customers requirement.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

F-series cylindrical fenders have set the standard for heavy duty fenders for close to 60 years. The newest generation are made by use of polyform’s unique, inhouse developed and patented polymatiq® technology. Highest breaking strength is taken care of by the two multiple rib-reinforced rock solid ropeholds. Tested for strength and flexibility in temperatures ranging from - 30oc to +60oc, these most heavy duty fenders feature high abrasive resistance and high energy absorption (up to 3. 8 ton meter for f-13), making them suitable for ships of up to 1500 ton d/w (f-13) . In addition to be a must for recreational crafts and yachts, the f-series cylindrical fenders are widely used by 
* coast guard and navy vessels
* pilot boats
* commercial ships
* “almost any kind of boats afloat”

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Features:

• Working Load Limit permanently shown on every shackle.
• Forged - Quenched and Tempered, with alloy pins.
• Capacities1 ton to 150 tons.
• Shackles 55 tons and smaller can be can be furnished proof tested with certificates to designated
• standards, such as ABS, DNV, Lloyds, or other certification.
• Material Certification (Chemical) must be requested at the time of order.
• Made from SAE 8620

 

Note:

• Maximum Proof Load is 2 times the Working Load Limit. Minimum Ultimate Load is 5 times the Working Load Limit.

 

Specification:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We have stock of stainless steel wire rope Thimble of various size and capacity according to customers requirement.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We have Wirelock Socket Compound in our stock as per customers requirement.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Plate lifting clamps are designed for efficient and easy handling of Plates. These lifting clamps are available with Different Capacity In Pairs.  These are available in capacity range 3 ton, 5 ton and 10 ton in pair.

Specification:

CAPACITY Shackle Size Plate Size EACHPAIR

1.5316 X 19162.5516 X 19254819 X 222851019 X 22327.51525 X 2835102025 X 2845

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We have stock of stainless stell Snap Hooks of verious size and capacity according to customers requirement.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Features:

• The most complete line of Eye hooks. Available ½ ton to 60 tons.
• Proper design, careful forging and precision controlled quench and tempering give maximum strength.
• Every Eye Hook has a pre-drilled cam which can be equipped with a latch.
• Eye hooks are load rated.
• Available in mild steel and alloy steel.

 

Note:

Proof load is 2 times Working Load Limit. All carbon hooks-average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks
1 ton to 22 ton - average straightening load (ultimate load) is 4 times Working Load Limit. Alloy eye hooks 30
Straightening load (ultimate Load) is 4 times the Working Load Limit. All Alloy hooks-average straightening load (ultimate load) is 4 times Working    Load Limit.

Specification:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are a renowned company engaged in manufacturing a wide range of Shank Hook. These hooks are rust proof and resistant to temperature variations. Available in various specifications and sizes, these are offered at competitive prices. We also meet customized requirement for our clients benefit.

Note:

Undercut according to IS - 1369 - 1961
Calculating formulae for C:
For MS, C = 26.73ÖP
For HS, C = 23.17ÖP
# Machined shank diameter (Min)
See IS: 4218-1967 ISO metric screw threads
$ Boundary dimensions of rolling bearings for general engineering purposes.
MS = Mild Steel
HS = High Tensile Steel

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are Manufacturer and Supplier of chian type Vertical Plate lifting Clamps According to buyers requirement.

Check the capacity of clamp. Right type of chain sling should be used with proper length and size. Load should be lifted at centre of gravity and ensure that plate or sheet inserted up to full depth. if the plate is longer than one meter in length then lift at two points and if it is hard to locate the centre of gravity lift the load at 3-4 points.Check the plate lift clamp before every use for the flaws or distortion/damages

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are one of the leading manufacturers and supplier of Stainless Steel Thimbles. The range of thimble, offered by us is made from the best quality brass. They are used in the various industries because of their heavy duty service and high durability.
Features:  
• Anti corrosive
• Fine finish
• Unmatched quality

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We have Different Capacity Vertical Plate Lifting clamps. These Clamps are Imported One.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are engaged in offering a wide range of High Tensile Eye Bolts, which can be availed in various shapes and sizes to meet the diverse requirements of our clients. These steel eye bolt and stainless steel eye bolt are manufactured using top quality raw material. They find application in various industrial sector of anchoring and towing system, oil field operations & vibration systems.

Features:

 

• High efficiency
• Precise dimensions
• Corrosion resistant

 

Specification:

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Available for wire rope sizes from ø 6 mm to ø 102 mm (1/4” to 4”) with an efficiency rating of 100%.
Standard version with pin and cotter pin. Also available with bolt, nut and cotter pin.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Ultimate Load is 4 times the Working Load Limit based on Grade 8 Chain.

Note:

• Positive Lock Latch is Self-Locking when hook is loaded
• Forged Alloy Steel- Quenched and Tempered
• Rated for both Wire Rope and Grade 8 Chain
• Meets ASTM A-952-96 and proposed Euronorm standards for Grade 8 chain fitting
• Fatigue rated.
• The SHUR-LOC-hook, if properly installed and locked, can be used for personnel applications and meets the intent of OSHA Rule 1926.550 (g) (4) (iv) (B)
• G-414 Heavy Thimble should be used with wire rope slings
• Individually Proof Tested at 2-1/2 times the Working Load Limit with certification
• Trigger repair Kit available (5-4316). Consist of spring, roll pin and trigger
• Designed with Engineered Flat to connect to Grade . 8 chain fittings.

 

 Features: 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are also supply crane ball hook in old and used type in very lowest price.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Forged - Quenched and Tempered
Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk.
Every Swivel hoist hook has a pre-drilled cam which can be equipped with a latch.
Load rating codes stamped on each hook. 322 Swivel Hooks use the same load rating code as 319 Shank Hooks.

Hoist hooks incorporate markings forged into the product which address two QUICK-CHECK features:

• Deformation Indicators - Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK measurement to determine if the throat opening has changed, thus indicating abuse or overload.
• Angle Indicators - Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.

 

Note:

• Carbon swivel hooks.75tC-15tC: proofload is 2 times working load limit.Designed with a 5 to 1 safety factor.
• Alloy swivel hooks 1.5tA-22tA : proofload is 2.5 times working load limit. Designed with a 4 to Isafety factor.
• Alloy swivel hook 31.5tA: proofload is 2 times working load limit. Designed with a 4 to 1 safety factor.

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Features:

• Hook is Forged Alloy Steel
• Quenched and Tempered.
• Integrated heavy duty latch.
• Large throat opening
• Meets ASTM A-952-96 and proposed Euronorm standards for Grade 80 chain fitting
• Anti-fouling due to carefully designed contours.
• Individually Proof Tested at 2.5 times the Working Load Limit with certification.
• Fatigue rated.

 

Specification:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We have emerged in offering our valuable customers a wide array of Bottle screw Turnbuckles. Clients can avail used and new turn buckles at market leading rates. These turnbuckles are used to adjust the tension or length of ropes, cables, tie rods and other tensioning systems. The products offered by us have two threaded eyelets, one with a left-hand thread and the other with a right-hand thread, one screwed into each end of a small metal loop. Without twisting the eyelets or attached cables, the tension can be adjusted by rotating the loop, which causes both eyelets to be screwed in or out, simultaneously.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We have wide range of turn buckle which includes straining screw turn buckle in very effective cost as per customers requirement.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Inspection/Maintenance Safety

Always inspect socket, wedge and pin for correct size and condition before using.

Do not use part showing cracks.

Do not use modified or substitute parts.

Repair minor nicks or gouges to socket or pin by lightly grinding until surfaces are smooth. Do not reduce original dimension more than 10%. Do not repair by welding.

Inspect permanent assemblies annually, or more often in severe operating conditions.

Consult the socket manufacturer for recommendations regarding the specific use and reapplication of wedge sockets.

 
Specification:
 
Wire Rope Size (in.)Weight Each (lbs.)Weight Each (lbs.)Dimensions (In.)ABCDGHJKLPRSTUV3/84.60.66.813.55111.632.818.431.381.061.940.52.530.441.912.147/164.60.66.813.55111.632.818.731.081.061.940.52.530.531.761.881/24.60.66.813.55111.632.818.731.021.061.940.52.530.531.761.881/28.519.194.231.411.252.133.3111.191.841.530.633.250.751.922.169/168.519.194.231.411.252.133.3111.472.41.530.633.250.6922.18

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Note:

• For intermediate sizes of wire ropes, the next larger size of bull dog grip shall be used.

 

Specification:

 

  

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

HiTech Lifting Clamps:

• Entire Clamps are galvanized / Powder Coated to resist corrosive and rusting action.
• All Clamps have rolled threads and extra heavy nuts.

 

Note:

• Refer to table I in following these instructions. Turn back specified amount of rope from thimble or loop. Apply first clip one base width from dead end of rope. Apply U-Bolt over dead end of wire rope - live end rests in saddle (Never Saddle a dead horse!).Tighten nuts evenly, alternate from one nut to the other until reaching the recommended torque.
•  
• When two clips are required, apply the second clip as near the loop or thimble as possible. Tighten nuts evenly, alternating until reaching the recommended torque. When more than two clips are required, apply the second clip as near the loop or thimble as possible, turn nuts on second clip firmly, but do not tighten. Proceed to Step 3.
•  
• When three or more clips are required space additional clips equally between first two - take up rope slack-tighten nuts on each U-Bolt evenly, alternating from one nut to the other until reaching recommended torque.

 

• Wire Rope Splicing Procedures
  The Preferred method of splicing two wire ropes together is to use interlocking turn back eyes with thimbles, using the recommended number of clips on each eye
  An alternate method is to use twice the number of clips as used for a turn back termination. The rope ends are placed parallel to each other, overlapping by twice the turn back amount shown in the application instruction. The minimum number of clips should be installed on each dead end .Spacing, installation torque, and other instructions still apply

 

Important

Apply first load to test the assembly. This load should be of equal or greater weight than loads expected in use. Next, Check and retightens nuts to recommended torque. In accordance with good rigging and maintenance practices, the wire rope end termination should be inspected periodically for wear, abuse, and general adequacy.

 

Specification:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We have wide range of Oblong master link assembly with different dimensions and capacity according to customers requirement in very effective price.

 

Specification:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are leading Supplier of oblong master link in various capacity and diamensions according to customers requirement in very effective price.

Specification:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are suppliers of connecting links of various size and capacity according to customers requirement in very effective price.

Specification:

Product Details:

Multipurpose, Portable, Universal, Gearless, Hand operated Pulling and Lifting machine, Supplied complete with telescopic, operating handle and standard Length of super flex steel fibre-mixed core wire-rope fitted with Hook or Shackle at one end and fused and tapered at the other end

Specification:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We Manufacturer and supplier of different types and capacity of regular swivels.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are suppliers of different size of lashing edge buckle in both forms welded and forged very good price.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

we are supplier of D ring which is used for coentainer in lashing purpose.We have in different capacity according to the buyers requirement.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are dealers of old and used ramshorn hooks as per the requirement.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)